Update: Approved and released 11/16/15
Update: Submitted 11/9/15
Preparing to submit version 1.59...
It looks like iTunes Connect is having some issues and not letting people add builds. Searching online, it seems to be a problem that started a couple of days ago. I appreciate your patience, specially for something out of my control.
Version 1.59 includes the updates from version 1.58 plus these improvements:
improved layer 3 and layer 2 path finding algorithm
optimized layer 2 native vlan logic
optimized layer 2 checking of serial connection authentication settings
updated the interface status checker
added settings option to ignore or require serial clock rate settings
(Update 11/7/15: canceled and submitted v1.59 instead)
What's new on version 1.58
updated show command filters, include and begin, to be available and usable for most of the show commands
added show command filters: exclude and section
added version checking on the App
added console text size option for the iPad
added color profile for the PC screen
Added router global commands:
no ipv6 route X:X:X:X::/X X:X:X:X::X
no ipv6 route X:X:X:X::/X fastethernet PORT/PORT
no ipv6 route X:X:X:X::/X serial PORT/PORT
no ipv6 route X:X:X:X::/X fastethernet PORT/PORT X:X:X:X::X
no ipv6 route X:X:X:X::/X serial PORT/PORT X:X:X:X::X
no interface fastethernet SUBINTERFACE
no interface gigabitethernet SUBINTERFACE
no interface serial SUBINTERFACE
no ip dhcp pool
no ipv6 router rip WORD
updated standby IP to remove duplicates standby numbers for show run
updated show to not show standby IP when none is configured
fixed default clock rate command to show up for serial interfaces only
fixed on show run: ipv6 rip WORD enable
fixed show ip protocol issue when there is an EIGRP neighbor not on the same group
removed show ip protocol command from the switch
fixed issue of double character delete on non-normal prompt like [switch0-config]? from copy run TFTP
updated web, tftp, ftp server checking
updated copy running-config tftp to show transfer progress
added copy startup-config tftp
added copy from tftp to both running and startup configurations
optimized help and help list speed
Problem:
Intermittent crash when entering a question mark (?) on unusual prompts like: [Switch0-config]
Example cause:
Switch# copy run tftp
Address or name of remote host []?10.1.1.100
Destination filename [Switch0-config]|
Adding the question mark (?) at the end causes intermittent app crash.
Workaround/Fix:
The prompt does not accept a question mark (?) (There is no help available here, even on the real device). Please try not use help (?) until fixed. This issue is fixed on the next update.
I received an email yesterday that I can't reply too because it gets sent back as undeliverable. If I have not replied to your inquiry, please contact me with an different email address or via live chat. Thank you.
(Update approved and released: 10/21/15)
We ended up canceling the 1.56 update and went ahead and submitted the 1.57 version.
So including what was scheduled for version 1.56 we added the following options as well:
added router global config commands:
no ip nat translation timeout [0-536870]
no ip nat translation timeout never
added router interface config commands:
default clock rate
no encapsulation frame-relay
no encapsulation frame-relay ietf
no encapsulation hdlc
no encapsulation ppp
no ppp authentication
no frame-relay interface-dlci [16-1007]
no frame-relay lmi-type ansi
no frame-relay lmi-type cisco
no frame-relay lmi-type q933a
no frame-relay map ip A.B.C.D [16-1007] broadcast
no frame-relay map ip A.B.C.D [16-1007] cisco
no frame-relay map ip A.B.C.D [16-1007] ietf
no ipv6 address
no ipv6 rip WORD enable
no standby [0-255] authentication md5 key-string WORD
no standby [0-255] preempt
no standby [0-255] preempt delay minimum [0-3600]
no standby [0-255] priority [0-255]
no standby [0-255] timers [1-254] [2-255]
no standby [0-255] track fastethernet PORT/PORT
no standby [0-255] track fastethernet PORT/PORT [1-255]
no standby [0-255] track gigabitethernet PORT/PORT
no standby [0-255] track gigabitethernet PORT/PORT [1-255]
no standby [0-255] track serial PORT/PORT
no standby [0-255] track serial PORT/PORT [1-255]
added router subinterface config command:
no encapsulation dot1q
added switch interface config command:
speed 1000 for gig ports
(Update 10/14/15: canceled and submitted v1.57 instead)
Big update on the horizon:
added switch privileged command:
show vtp password
added global config commands:
no username WORD
security passwords min-length
no security passwords min-length
no banner login
no banner motd
no ip domain-name
added switch global config commands:
no interface vlan [number]
no vtp mode
no vtp password
added router global config commands:
no interface loopback
added switch interface command:
switchport trunk native vlan [number]
no switchport trunk native vlan
added dhcp-config commands:
no network A.B.C.D A.B.C.D
no domain-name WORD
no dns-server A.B.C.D
no default-route A.B.C.D
no lease
added interface config commands:
no speed
no duplex
updated vtp password command to check for vtp domain
updated Layer 2 algorithm
updated the ip address commands to include checks for:
- ip overlap
- network and broadcast address
- invalid subnet mask
fixed design edit layout issue for some devices on ios 9
fixed lab issues due to lab titles having the tutorial prefix
fixed partial command issues with an *
updates & fix for lab tagging
- added feature to to stop the cell jumps when tagging labs via drag and drop
- fixed crash caused by drag & drop of an already tagged lab to the bottom of the same list
- added checks for ending drag and drop edits (removal of the done edit button, when only the ALL section is left)
- added checks so 'test' and 'Test' tags are the same
- prevented cell movement when ALL is the only section