Update: Approved and released: 5/16/17
Big update with lots of improvement. We added new supported commands and features.
added privileged commands:
show ip dhcp pool
release dhcp fastethernet PORT/PORT
release dhcp serial PORT/PORT
renew dhcp fastethernet PORT/PORT
renew dhcp serial PORT/PORT
added router interface commands:
vrrp [1-255] ip A.B.C.D
vrrp [1-255] preempt
vrrp [1-255] preempt delay minimum [0-3600]
vrrp [1-255] priority [0-255]
no vrrp [1-255] ip A.B.C.D
no vrrp [1-255] preempt
no vrrp [1-255] preempt delay minimum [0-3600]
no vrrp [1-255] priority [0-255]
vrrp [1-255] track [1-500]
no vrrp [1-255]
no vrrp [1-255] track [1-500]
vrrp [1-255] track [1-500] decrement [1-255]
no vrrp [1-255] track [1-500] decrement [1-255]
improved layer 2 & layer3 path finding logic
improved DHCP address assignment speed
improved routing table update routine
improved switchport status checking
added multiple invalid entry checks and messages
added network and broadcast address checks when setting interface ip address
added lab alert for possible ip address conflict
added IPv6 address to the topology view if IPv4 is not configured
updated subinterface mac address
updated ip route and ipv6 route display
updated cisco device ping result: Sending 5 ICMP Echoes
updated ping and traceroute results for bad IP or hostname
updated resutls for: show ip dhcp server statistics
updated traceroute to use the real IP instead of HSRP/VRRP virtual address
updated hsrp mac address to hex of standby group
subinterfaces are now included in the routing protocol process
design save warns for disconnected devices or multiple networks in the lab
fixed number range checking
leading zeros on type numbers removed
ospf no longer takes 0.0.0.0 as router-id
fixed configuration issue when setting a loopback address with 255.255.255.255 mask
fixed ospf path finding
fixed app crash issue with command: show ip protocols
fixed design issue where port labels are not removed when removing a connection
Other stability improvements